Category Archives: Heating Services

air conditioning repair brisbane

Does Location Affect Your Heater Installation Cost

Fed up of all the heater repairs over the years? Are you thinking of replacing your heater as it’s more than 10 years old now? If this is the case, you naturally wonder how much heater installation costs in 2017, which is explained below.

Homeowners generally have to spend about $850-$2500 for installing water heater, including the labour and heater costs. There are various factors that influence the installation costs like type of heater installed, its size and capacity, power type and complexity of the installation job.

air conditioner repair brisbane

1. Tankless heaters cost more to install

As mentioned above, the type of heater affects the cost for heating repair carlton. The installation is rather easy and straightforward if you are installing a regular, gas type heater, especially to replaces similar older one with a new model. In this case, you may not have to pay more than $300-$450 for the installation.

You however have to pay about $1200 to install a tankless gas heater as this is a more time-consuming process. You may have to pay even more if you opt to switch from a tank to a tankless style of heater as your existing meter, gas piping and gas line to the meter may not accommodate the tankless heater’s high gas load.

You may also have to retrofit the existing gas line, install a new gas line if needed, install the right venting system and in some cases, also need some electrical wiring to be done. Based on your basement and ventilation, you may also have to change your existing gas, water and even electricity lines as the gas tankless heater can’t be vented into the chimney as it needs a direct exterior vent. You thus have to spend at least $1500-$3500 for labour costs.

2. Location is a factor too

Even if you switch to an electric tankless unit, your air conditioner repair brisbane has lots of work like rewiring and expanding your home’s existing system to handle the heater’s extra power consumption. This costs at least $1000 to $1500, but can also reach $3000 if there is more labour involved like opening walls.

Your heater installation costs also depend on where you live as its 15-25% higher in high-income suburban areas like San Francisco and Miami when compared to the lower-income groups.

3. Beware of scams

Be careful of unreasonable pricing scams where some plumbers may charge extra by offering to buy your hot water heater for you and then include their labour charges in the total cost. So you may end up paying much more for even a simple installation.

The best way to avoid this is by getting 3-4 estimates from local professionals, asking them what they will be doing during your heater installation, and then compare costs. It also helps if you do your own online research and ask friends or neighbours who have recently installed heaters.

With all this research, you not only know how much to expect while installing your heater, even your plumbers will think twice before pulling a scam on you as they know you are quite well-versed with the factors influencing a heater installation costs.

heating repair perth

heating repair hobart

5 Benefits Of Hiring A Professional For Ducted Heating Servicing In Melbourne

What does a broken heating and cooling system mean to your Melbourne household? Like most people, you probably can’t help but worry about sweating out another summer or worse still, bearing another chilling night? And while the manufacturer’s manuals and do it yourself guides may come out as seemingly inexpensive alternatives for handy homeowners, you are better off hiring a ducted heater servicing Melbourne expert for all your maintenance and repairs services. Here are five advantages of hiring a ducted HVAC professional.

  1. Professionals get it right the first time

It takes more than a comprehensive user manual to identify problems raking your ducted heating and cooling system and adequately solve them. It takes experience in the field and with your home’s particular duct system; two traits that only an experienced ducted heating servicing Melbourne professional can master. Without such experience, you risk causing more damage to the ductwork with every attempted DIY correction.

  1. Experts help identify underlying problems

One of the most common problems of ducted heating systems is dusty air finding its way into your home. In any case, your first reaction would able to change the air filter. But what happens when the air doesn’t clean out even after changing the air filter?

At such a point, a professional would come in handy in helping you identify the deeper underlying problem with the duct. You probably didn’t even need to change the air filter in the first place, something that you will never know if you don’t hire ducted heating servicing Melbourne services from a heater repair professional.

 heating repair canberra

  1. Professional servicing extends beyond your ducted HVAC needs

What happens when you call in a professional ducted system services for regular system checkup? A good professional goes far and beyond basic servicing. They don’t just help you identify potential causes of duct problems; they offer advice on how such can be solved on time.

  1. The servicing is safe and reliable

A heater repair and servicing professional isn’t just trained and experienced on how to offer superior services. They are trained on how to safely dispose of the replaced heating system parts and cleaned out dirt. By hiring a professional for your duct heating servicing Melbourne, you are assured of peace of mind not just from superior services but on the thought that your family is safe from accidents or any other complications arising from the unhygienic disposal of repaired parts.

  1. Professionals help you save time and resources

Have you ever considered the level of sacrifice regarding both time and resources any attempt to service your home’s ducted heating and cooling system would require? For starters, you would be required to spend a lot of time studying the different parts of the ductwork with a keen emphasis on its numerous points of failure.

heating repair glenroy

 

You also have to spend a significant amount of money acquiring the different servicing tools. And even more in the case of repairs of replacements where you are forced to acquire sets of the different repair and replacement tools, just in case you don’t get it right the first time.

When it comes to ducted heating servicing Melbourne, you need professional help. While foregoing professional help and settling do it yourself techniques may seem like the most feasible option at first, it is more time consuming, unsafe, and even more expensive in the long-run. You, therefore, are on a better side hiring an experienced ducted heating expert than going about the servicing all by yourself.

4 Reasons for loud noises from your heating system

heating system

You desperately need a good night’s sleep, but your noisy heating system seems to have other plans for you! You can’t switch it off as it’s cold and you should not ignore these loud noises as it usually means something’s wrong with the HVAC. While professionals can solve the problem you can also perform these easy 4 troubleshooting tips before that.

  1. Boiler making loud noises

Limescale is usually the cause for noisy boilers triggered by the accumulation of hard water in the boiler’s heat exchanger. Adding chemical descalers to the F&E tank so that it pumps through the heating system helps remove excess scale after which you have to flush clean water through the unit a few times. Adding inhibitors to the heating system also helps as it prevents corrosion.

A low water flow rate can also create loud noises as modern gas boilers work optimally with a particular flow rate. So make sure the flow rate is maintained all the time. Improper installation can lead to air in the central heating system which makes your boiler emit strange, loud noises.

  1. Humming sounds

As the pump is usually the culprit for humming sounds from the heating system, you have to check its speed. Too high speeds lead to vibration and noise which can be resolved by adjusting the speed.

If this does not stop the humming, replacing or installing anti-vibration brackets may help. If this too doesn’t help, check the pipe size as too small pipes create a humming sound as it cannot hold the water it carries. The solution here is to install larger pipes, which has to be done by a professional heating repair blackburn technician .

boiler issues

  1. Creaking sounds

Pipes under the floorboards or behind walls may be the cause for creaking sounds you hear when the heating system is in use. Pipes generally expand as hot water passes through them and contracts to normal size once the water cools down.

It’s when the expanded pipes are very near the floor or wall that you hear loud noises when they expand and contract as water passes through them. The solution here lies in finding out where the noise comes from and inspecting the pipes.

If the pipes are sagging, place some felt around the pipes for a better fit and if it’s too tight, try to create some space for expansion by creating a surface notch. Even pipes touching each other may create noises; so placing some felt in between them helps create some space and reduce the noise.

  1. Banging sounds

Waves are created in pipes if water is abruptly stopped, and these waves cause a banging noise which continues till the waves settle. Check if there’s a faulty stop-cock, ball valve or tap in the unit as it prevents the smooth flowing of water through the system. If this too does not solve the problem, check and ensure the water is not flowing too fast.

If your heating system still makes loud noises despite all these troubleshooting tips, it means it’s time you called professional HVAC mechanics to take a look at your unit! They will be able to check and find out if the heating system parts are properly installed, or if there is something else causing the loud noises.  

 

What is an Infrared Heater?

With the onset of winter comes the need to do away with cooling service Melbourne. Instead, you and your family will now need to rely on a heater to keep your home a comfortable place to live in.

There are numerous heating options to choose from: central heating, an electric heater, or perhaps a furnace. Infrared heaters, in particular, are a common choice. Read on to find out more about infrared heaters and why they might be the ideal heater for your home.

What is an Infrared Heater?

Imagine having a tiny sun inside your home – that’s how an infrared heater works. It is able to provide heat by emitting infrared light which, though it cannot be seen by the naked eye, is able to warm bodies and items within its proximity.

An infrared heater is able to produce this light with the use of coils. A reflector then directs this light outside of the heater to its surroundings.

What are the Pros of Using an Infrared Heater?

  1. An infrared heater works immediately, with minimum setup required.

You only need to turn the infrared heater on for it to start working and providing heat to its surroundings instantly. Once on, stay near the infrared heater and find yourself getting warm in no time!

  1. Infrared heaters are an environment-friendly, clean source of heat.

Because they do not require the use or burning of fossil fuels to function, nor do they burn up wood in order to provide heat, they do not release harmful waste into the air with every use. They’re definitely a clean, green, heating machine!

Additionally, they’re an efficient heating option, because they do not heat entire rooms, only objects and bodies within their vicinity.

  1. An infrared heater is able to warm you up with no distracting noise.

Because it does not use a fan, an infrared heater is basically completely silent, providing heat without distraction, so you can sleep peacefully in a warm, noise-free environment at night.

What are the Cons of Using an Infrared Heater?

  1. The light an infrared heater emits can be distracting for some people.

It may be a quiet machine, and without noise it therefore doesn’t keep you from getting a good night’s sleep, but if you are the type of person who needs pitch-black darkness to get some good shut-eye, the infrared heater might not be a good option for your bedroom.

Because it emits light in order to provide heat, this orange glow can be distracting and too bright for some people.

  1. An infrared heater cannot heat an entire room or large spaces.

Infrared heaters are used to warm its immediate surroundings. They’re ideal for a spot near your couch or in the bedroom. But if you’re looking to warm a much bigger space with more people, an infrared heater might not be up for the job due its limited heating capacity.

  1. An infrared heater does not provide lasting warmth.

Because an infrared heater does not warm the air inside a space, its heating effects are not lasting. That is, once an infrared heater is turned off, the warmth it provides almost immediately disappears.

If you are looking for infrared heating repair Adelaide, Quick Air will be a good choice!

 

What Could Make a Heater so Loud?

noiseIt can be very scary and intimidating when your heater makes a loud bang when it turns on. For light sleepers and mothers with young babies, it can give you sleepless nights you never wish to remember. Here are a few major causes of heater noise and the tips on how to get rid of it:

Dirty furnace burners

If the noise occurs only when your furnace turns on and it lasts for several seconds or minutes before you start feeling the hot air, your furnace burner may be dirty. Accumulated dirt on the furnace burners will cause gas to collect on the furnace before it ignites. The delayed ignition from huge gas build up brings about the big bang comparable to a mini explosive.

You should never ignore this noise since delayed ignition may eventually crack the heat exchanger of your furnace. When this is cracked, you will have to purchase a new furnace and can be quite expensive.

Seek the services of professional heater cleaners if this is what causes the noise.
Delayed gas ignition/explosive problem

If the banging noise comes from the heater, then the delayed ignition is the likely cause.

Delayed gas ignition as discussed above, occurs when the gas in your furnace builds up instead of igniting immediately. The delayed ignition may be caused by the following conditions:

  • Excessive air mixing with the gas, making it difficult to ignite.
  • Too little gas reaching the burners due to low gas pressure from the supply.
  • Restricted, dirty, or weak pilot light for older furnace models.
  • Misaligned or dirty furnace burners

Expanding and contracting air ducts

If you hear clapping noise a few meters away from your furnace, then the issue is most likely in the air ducts.
When the furnace’s blower begins, it both sucks in air from around the home and blows it out through the supply ducts. This makes different portions of your ducts to contract (pop in) and expand (pop out). This may cause little noise since the minor popping is natural. If the expansion and contraction is severe, it may result in loud popping and banging noise and may be as a result of the following conditions:

  • Undersized ducts- As the blower pulls and pushes air through a very small area, it may cause strain on the air ducts.
  • Closed vents- Will make the blower struggle harder to push out and pull in air, making the ducts to forcefully expand and contract as a result of the increased air pressure. The same amount of air tries to get in through squeezed passageway exerting more pressure on the open passageway.
  • Clogged air filter- This may make it difficult for your blower to pull in the return air, hence causing the return ducts to forcefully pop in generating loud bangs.

Try opening the air vents and change the furnace filters and see if the problem goes away. If that doesn’t work, you may need to call professional heater technicians for further troubleshooting. They may advise you further on what needs to be changed especially if the ducts are undersized.

The benefits of heat pumps

When it comes to deciding an efficient heating option, homeowners often get overwhelmed because of availability of various heating solutions such as heat pumps, central heating systems, boilers, electric space heater, pellet stoves, etc. Out of these many options, heat pump’s popularity has dramatically risen over years.

Not only do heat pumps boast for high energy efficiency ratings, they are practical, convenient and environmentally friendly to use. In addition, they can also be used for cooling in summer, dehumidifying, air filtration, etc. Many consumer advocacy groups and government agencies also endorse heat pumps to be the most efficient heating option.

Here are some of the key benefits of heat pumps

Energy efficiency

With achieving an average COP (Coefficient of Performance) figures of four or more, many energy efficiency conservation agencies has identified heat pumps as the most efficient form of heating with between 300% to 400% efficiency. This means they only use an average of less than 1 kilowatt to achieve four kilowatts of heating or cooling, while also making it cheaper to run as well.

Comfort control and convenience

Heat pumps spread the warmed air with the use of a fan, making the heating dispersed more evenly than any other heating options. Your can have a precise indoor comfort control in a single touch of a button with a heat pump. Once reaching your desired comfortable temperature, it will automatically maintain that temperature without continuing for more heat. Some heating appliances, on the other hand, continue heating resulting in an unfavorable indoor temperature. Heat pump also allows you to pre-program the start up or turn off schedules that suit you.

Safety

The fire services always suggest children, furniture, clothing be at least a meter away from fires or heaters. However, heat pumps, unlike many heating options including electric heater, gas burners, have no hot surfaces or flames and hence they are absolutely safe for children as well.

Improved Air Quality

Most heat pumps can improve your indoor air quality by getting rid of nasty allergens through advanced air filtration system. They can remove airborne particles and provide maximum air quality that is vital for allergy and asthma sufferers.

Cooling in summer

One of the key benefits of heat pumps is their unique functionality to be used both in winter and summer. Not only can they be used to heat in winter, but they can also be used to cool your house in summer. They are also used in dehumidification to fight excess moisture to enhance comfort levels.

If you reside in Melbourne area and want your heat pump inspected for any issue or maintained to help prolong its lifespan, contact Heating and Aircon Repairs Online and let our qualified heating system repair Melbourne and maintenance services access your system and offer you with quality services.